TURN-AROUND IS USUALLY UNDER 7 WORKING DAYS FROM WHEN WE GET IT.
THIS LISTING IS FOR A CYLINDER BORE JOB FOR "YOUR" (1984 + 1985 ATC125M) (1985 + 1986 TRX125) CYLINDER
WE WILL BORE TO 56.50MM FROM STOCK 55.00MM TO PUT IT BACK INTO NEW CONDITION.
(IF YOU HAVE BAD RUST AND NEED TO GO BIGGER WE ARE WORKING ON THAT)
SO, YOU SEND US YOUR (((CLEAN WITH GUIDE/DOWEL PINS REMOVED))) CYLINDER, AND WE WILL RETURN - YOUR CYLINDER, WITH A FRESH BORE READY TO PUT BACK INTO YOUR UNIT. WITH A NEW MATCHING PISTON KIT..
=============================================================================================
ONLY SEND A CYLINDER FROM ONE THESE MODELS :
(1984 + 1985 ATC125M) (1985 + 1986 TRX125)
=============================================================================================
NOW FOR THE CYLINDER:
(ONLY ONE INCLUDED) PLEASE PACK IT LIKE IT WAS AN EGG
WHEN YOU SEND THE CYLINDER INTO US BE SURE TO INCLUDE THE ORDER NUMBER, WHICH WILL BE SENT TO YOU IMMEDIATELY AFTER YOU CHECK OUT, VIA EMAIL.
WHEN PACKING UP YOUR CYLINDER DO "NOT" USE ALL PACKING PEANUTS AS THIS WILL ALMOST GUARANTEE A BROKEN FIN.
THE BEST WAY, IS TO USE SOMETHING LIKE AN OLD BEACH TOWEL AND MAKE IT INTO A BALL, THEN IN THE BOX.
JUST ALL CARDBOARD DON'T ALWAYS WORK EITHER.
!!! WE WON'T BORE OR BE RESPONSIBLE FOR A CYLINDER DAMAGED ON THE TRIP TO GET TO US !! (IF BROKEN ALREADY, JUST TELL US BEFORE YOU SEND IT)
PLEASE HAVE THE CYLINDER'S TWO GASKET SURFACES COMPLETELY CLEAN OR WE WILL HAVE TO START CHARGING A CLEANING FEE.... THANKS
!!!!!!!!!!!!!!!!!!!!!!!
WHEN YOU SEND THE CYLINDER INTO US BE """SURE""" TO INCLUDE THE ORDER NUMBER FROM THE TICKET. OR A COPY OF THE TICKET SO WE KNOW WHO'S CYLINDER IT IS... THANKS
!!!!!!!!!!!!!!!!!!!!!!!
=======++++++++++++++=============++++++++++++===============
SEND TO:
DrATV_RETIRED
C/O JACK FRINGER
148 6TH RD
MARYSVILLE KS 66508
=======++++++++++++++=============++++++++++++===============
WE HAVE TO / MUST SEND IT BACK TO THE ADDRESS ASSOCIATED / LINKED TO YOUR PAYPAL OR CREDIT CARD ACCOUNT (SORRY NO EXCEPTIONS)
IT WILL COME BACK TO YOU BORED OUT AND FINISHED WITH THE CORRECT CROSS HATCH AND CLEARANCE TO MATCH THE INCLUDED PISTON KIT.
WITH THIS SPECIAL 125 PISTON YOU WILL SEE THAT THE PISTON WON'T COME TO THE TOP OF THE CYLINDER AT TOP DEAD CENTER. DO NOT FREEK OUT IT WILL BE FINE. THE BIGGER BORE AND THE ALL METAL 55MM HEAD GASKET WILL MAKE UP FOR THAT.
=============================================================================================
THE PISTON KIT:
(ONLY ONE INCLUDED)
PISTON, RINGS , PISTON PIN AND 2 PIN CLIPS WILL BE MATCHED TO THE CYLINDER, AND SENT BACK WITH THE CYLINDER.
=============================================================================================
SO IN CONCLUSION WITH THIS LISTING YOU GET YOUR CYLINDER BORED,, ONE NEW PISTON KIT,, AND
FREE RETURN SHIPPING WHEN YOU BUY THIS PACKAGE
=============================================================================================
TURN-AROUND IS USUALLY UNDER 7 WORKING DAYS FROM WHEN WE GET IT.
----------------------------------------------------------------
